#! /bin/sh
### BEGIN INIT INFO
# Provides:          sslh
# Required-Start:    $remote_fs $syslog $network
# Required-Stop:     $remote_fs $syslog $network
# Default-Start:     2 3 4 5
# Default-Stop:      0 1 6
# Short-Description: ssl/ssh multiplexer
# Description:       sslh lets one accept both HTTPS and SSH connections on the
#		     same port. It makes it possible to connect to an SSH server
#		     on port 443 (e.g. from inside a corporate firewall) while
#		     still serving HTTPS on that port.
### END INIT INFO

# Author: Guillaume Delacour <gui@iroqwa.org>

# Do NOT "set -e"

# PATH should only include /usr/* if it runs after the mountnfs.sh script
PATH=/sbin:/usr/sbin:/bin:/usr/bin
DESC="ssl/ssh multiplexer"
NAME=sslh
DAEMON=/usr/sbin/$NAME
DAEMON_OPTS=""
PIDFILE=/var/run/sslh/$NAME.pid
SCRIPTNAME=/etc/init.d/$NAME
RUN=yes

# Read configuration variable file if it is present
[ -r /etc/default/$NAME ] && . /etc/default/$NAME

# Exit if the package is not installed
[ -x "$DAEMON" ] || exit 0

# Load the VERBOSE setting and other rcS variables
. /lib/init/vars.sh

# Define LSB log_* functions.
# Depend on lsb-base (>= 3.2-14) to ensure that this file is present
# and status_of_proc is working.
. /lib/lsb/init-functions

#
# Function that starts the daemon/service
#
do_start()
{
	# Return
	#   0 if daemon has been started
	#   1 if daemon was already running
	#   2 if daemon could not be started
    
    # Use this if you want the user to explicitly set 'RUN' in
    # /etc/default/
    if [ "$RUN" != "yes" ]
    then
        echo "$NAME disabled, please adjust the configuration to your needs "
        log_failure_msg "and then set RUN to 'yes' in /etc/default/$NAME to enable it."
        return 2
    fi
    
	# sslh write the pid as sslh user
	if [ ! -d /var/run/sslh/ ]
	then
		mkdir -p /var/run/sslh
		chown sslh:sslh /var/run/sslh
	fi

	start-stop-daemon --start --quiet --pidfile $PIDFILE --exec $DAEMON --test > /dev/null \
		|| return 1
	start-stop-daemon --start --quiet --pidfile $PIDFILE --exec $DAEMON -- \
		$DAEMON_OPTS --pidfile $PIDFILE \
		|| return 2
	# Add code here, if necessary, that waits for the process to be ready
	# to handle requests from services started subsequently which depend
	# on this one.  As a last resort, sleep for some time.
}

#
# Function that stops the daemon/service
#
do_stop()
{
	# Return
	#   0 if daemon has been stopped
	#   1 if daemon was already stopped
	#   2 if daemon could not be stopped
	#   other if a failure occurred
	start-stop-daemon --stop --quiet --retry=TERM/30/KILL/5 --pidfile $PIDFILE --name $NAME
	RETVAL="$?"
	[ "$RETVAL" = 2 ] && return 2
	# Wait for children to finish too if this is a daemon that forks
	# and if the daemon is only ever run from this initscript.
	# If the above conditions are not satisfied then add some other code
	# that waits for the process to drop all resources that could be
	# needed by services started subsequently.  A last resort is to
	# sleep for some time.
	start-stop-daemon --stop --quiet --oknodo --retry=0/30/KILL/5 --exec $DAEMON
	[ "$?" = 2 ] && return 2
	# Many daemons don't delete their pidfiles when they exit.
	rm -f $PIDFILE
	return "$RETVAL"
}

#
# Function that sends a SIGHUP to the daemon/service
#
do_reload() {
	#
	# If the daemon can reload its configuration without
	# restarting (for example, when it is sent a SIGHUP),
	# then implement that here.
	#
	start-stop-daemon --stop --signal 1 --quiet --pidfile $PIDFILE --name $NAME
	return 0
}

case "$1" in
  start)
	# check if sslh is launched via inetd
	if [ -f /etc/inetd.conf ] && [ $(egrep -q "^https.*/usr/sbin/sslh" /etc/inetd.conf|wc -l) -ne 0 ]
	then
		echo "sslh is started from inetd."
		exit 1
	fi

	log_daemon_msg "Starting $DESC" "$NAME"
	do_start
	case "$?" in
		0|1) log_end_msg 0 ;;
		2) log_end_msg 1 ;;
	esac
	;;
  stop)
	log_daemon_msg "Stopping $DESC" "$NAME"
	do_stop
	case "$?" in
		0|1) log_end_msg 0 ;;
		2) log_end_msg 1 ;;
	esac
	;;
  status)
       status_of_proc "$DAEMON" "$NAME" && exit 0 || exit $?
       ;;
  restart|force-reload)
	log_daemon_msg "Restarting $DESC" "$NAME"
	do_stop
	case "$?" in
	  0|1)
		do_start
		case "$?" in
			0) log_end_msg 0 ;;
			1) log_end_msg 1 ;; # Old process is still running
			*) log_end_msg 1 ;; # Failed to start
		esac
		;;
	  *)
	  	# Failed to stop
		log_end_msg 1
		;;
	esac
	;;
  *)
	echo "Usage: $SCRIPTNAME {start|stop|status|restart|force-reload}" >&2
	exit 3
	;;
esac

: